Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

AS5300 instead of PA-MC-8E1/120

Hi, I have a 7204VXR with PA-MC-8E1/120 module which is handling 12-Mbit/s bandwidth comes from 6 E1 ports and going out via FastEthernet port. Can I replace this box by an old AS5300 which has an 8 ports CE1 card?

Thanks,

Saeed Zamani.

1 REPLY
Silver

Re: AS5300 instead of PA-MC-8E1/120

In functional, I consider the AS5300 should able to support the required interfaces. However, it also depends on the required features that may not support in AS5300.

You need to check the supporting features in AS5300 that can work for you. Moreover, I have no information of the performance of AS5300, so I cannot sure that can work as the same as 7204 or not.

And, the AS5300 is EoL and the EoS (no hardware and software support) will be June 2007, it is fine for lab test but it will be an issue if it is for production network.

http://www.cisco.com/en/US/products/hw/univgate/ps501/prod_eol_notice0900aecd8052854b.html

Hope this helps.

119
Views
0
Helpful
1
Replies
CreatePlease to create content