I am trying to enable a second WAN interface on our ASA.
the end goal is to move all internet traffic to the new connection, but first i want to test it working.
I have setup my computer as an object in the ASDM and the interface is configured correctly (same settings on a different router and that was working)
I setup a route with a lower metric ( 1 lower than the default route which routes everything through current main internet interface) to route traffic from my computer out through the new interface but i am still connected on the old interface.
I duplicated some of th NAT rules (but i would have thought if these werent working then i would have no internet connection anyway)
First try to check if ur new internet link is working or not.Try giving ur local system a public IP and then try to browse the internet.Do not forget to add the DNS server, or else you will not be able to surf.
If this test is fine, then just for testing try to host some server on the internet and check if the connectvity is through. I don`t think you will be able to change your default route at the beginning , this has to be your last step, when you have migrated everything to your new set of IP`s.
And just for the info, if you are hosting a website kind of stuff, then the end user will not understand then your traffic will go in an a-symmetric way, which should be OK till the time you migrate.
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...