Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

asa 5510 asdm 6.21 ios 8.2 - configure redundant isp's

asa 5510 8.2(1)11 asdm 6.21

I have two separate ISP connections I would like to use for redundancy. THE ASDM above has the option to configure redundant interfaces, and it works without much config, if both interfaces are DHCP. How do I configure one ISP using DHCP (address reservation) and the second ISP with a static IP? The new ASDM almost makes it simple, but there is no option to configure the interfaces once they are redundant. I can go to the CLI if I need to do that.

I have it set up with the DHCP ISP now and if I plug and unplug that ISP from the 1st redundant to the 2nd redundant port it works (picks up the IP)...

2 REPLIES
Hall of Fame Super Silver

Re: asa 5510 asdm 6.21 ios 8.2 - configure redundant isp's

New Member

Re: asa 5510 asdm 6.21 ios 8.2 - configure redundant isp's

Apparently I will have to try something similar. I was hoping the new ASDM/IOS with it's right-click ability to choose "redundant" configuration was going to be the solution.

911
Views
0
Helpful
2
Replies