Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

asa source and destination NAT

I would like to nat both the source and the destination address on an ASA 5550:

---

Original packet:

Source: ANY / Destination: Public IP

Translated packet:

Source: DMZ interface / Destination: Servers real internal IP address

---

Right now, I do only the following:

static (Inside,Outside) tcp 212.3.244.11 25 192.168.205.71 25 netmask 255.255.255.255

thanks for your help

307
Views
0
Helpful
0
Replies
CreatePlease to create content