I need to move from an ASA with no IPS to one with IPS. Can I copy over the configuration file from the current ASA to the new one. Will the IPS module cause me grief. It's a 5510 with a security plus license.
There will be no problem. IPS configuration is done seperately. All that ASA needs configured is the traffic to send to IPS. If you dont have IPS installed and you install one your original configuration remains intact. You will just have to add more to make the IPS work.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...