Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ASR 1002 error

Anyone know what this error means:

%CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error TXSPI0 Async FIFO High Data ECC1 Error, param 17 param c8

I am getting this on my new ASR1002 configured as follows:

Chassis type: ASR1002

Slot Type State Insert time (ago)

--------- ------------------- --------------------- -----------------

0 ASR1002-SIP10 ok 3d05h

0/0 4XGE-BUILT-IN ok 3d05h

0/1 SPA-5X1GE-V2 ok 3d05h

R0 ASR1002-RP1 ok, active 3d05h

F0 ASR1000-ESP10 ok, active 3d05h

P0 ASR1002-PWR-AC ok 3d05h

P1 ASR1002-PWR-AC ok 3d05h

Slot CPLD Version Firmware Version

--------- ------------------- ---------------------------------------

0 07120202 12.2(33r)XN2

R0 08011017 12.2(33r)XN2

F0 07091401 12.2(33r)XNB

2 REPLIES
New Member

Re: ASR 1002 error

Looks like a line card needs replacing. Problem solved.

New Member

ASR 1002 error

This is seem to be as  bug. please have a look on the below.

CSCsv71393 Bug Details

ASR: %CMCC-3-PLIM_STATUS observed on SPA
None

Symptom:
%CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error RXSPI3 DIP4 Error, param 16 param 1 observed on SPA

Conditions:
When traffic is sent at higher rates on SPA-8XOC12-POS SPA, CMCC-3-PLIM_STATUS errors are seen and some packet drops would be observed on the SPA.

Workaround:
None

Reference,

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsv71393

2487
Views
0
Helpful
2
Replies
CreatePlease to create content