Recently upgraded our 3800 series router to a ASR1002. Since then I have had trouble with specific servers unable to connect to the network.
99% of the equipment connected to this new router is trouble free.
We are using IP-routing but for some reason we have a few windows servers that do not like this new router...When I try to ping I get the error "ping transmit failed general failure." This even happens when I ping the IP on the NIC... and windows will report a IP conflit when there is no other device using the IP.
The servers are connected to this interface via a 3com 4210G switch.
description Ethernet to Network
ip address X.X.X.X 255.255.255.0
ip access-group X in
ip access-group X out
no ip unreachables
ip flow ingress
This is probably a really easy problem and the solution is really simply.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.