Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

ASR 1002-X HRSP Object Tracking

Hello

 

I have the following config in place. I want to make sure my HSRP is tracking to be affective.

Please review and advise.

 

track 1 ip route (ISP PER ip address) 255.255.255.252 reachability

interface GigabitEthernet0/0/5
 description Inside_DMZ_3750
 ip address 10.27.254.3 255.255.255.0
 standby 1 ip 10.27.254.1
 standby 1 priority 150
 standby 1 preempt
 standby 2 ip 10.27.254.2
 standby 2 priority 90
 standby 2 preempt
 speed 1000
 no negotiation auto

I have tried to add standby track 1 statements to HSRP config, however they do not show in display.

   standby 1 track 1 ?

   standby track 1 ?

sMc
2 REPLIES
New Member

Hello can anyone provide some

Hello

 

can anyone provide some expert guidance on this issue?

sMc
New Member

1 more question I am using

1 more question

 

I am using this track command "track 1 ip route 1.1.1.9 255.255.255.252 reachability

is there anything else I should add to this:

ASR1002x(config-track)#?
Tracking instance configuration commands:
  default  Set a command to its defaults
  delay    Tracking delay
  exit     Exit from tracking configuration mode
  ip       Tracking IP configuration subcommands
  no       Negate a command or set its defaults

sMc
110
Views
0
Helpful
2
Replies
CreatePlease to create content