Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

ASR1001 BDI configuration equivalent to BVI's and bridge-groups in IOS?

I have been asked what the equivalent of bridge-groups and BVIs is for an ASR1001 and I am struggling to find an example.

If we have this IOS configuration:

bridge 1 protocol ieee

bridge 1 route ip

!

interface GigabitEthernet0/1

bridge-group 1

!

interface GigabitEthernet0/2

bridge-group 1

!

interface BVI 1

ip address 10.10.10.10 255.255.255.224

!

What would be the equivalent for an ASR1001 with IOS XE?

Thanks

Andy

Everyone's tags (4)
5 REPLIES
Hall of Fame Super Bronze

ASR1001 BDI configuration equivalent to BVI's and bridge-groups

interface Gig0/1
   service instance 1 ethernet
     encapsulation untagged
     bridge-domain 1
interface Gig0/2
   service instance 1 ethernet
     encapsulation untagged
     bridge-domain 1
interface BDI1
   ip address x.x.x.x 

Re: ASR1001 BDI configuration equivalent to BVI's and bridge-gro

Thanks for the quick reply Edison.  I searched for a good half hour trying to find this...

Are there any performance penalties with configuring this as opposed to applying the IP address to a physical interface (its for resilience and needs to be connected to a failover pair of ASA's via a stack of 3750's).

Cheers

Andy

Hall of Fame Super Bronze

ASR1001 BDI configuration equivalent to BVI's and bridge-groups

No performance penalty but you are extending your L2 domain which comes with other caveats (i.e. broadcast storms, etc).

New Member

ASR1001 BDI configuration equivalent to BVI's and bridge-groups

Hi Edison,

With BDI how is spanning-tree done?

regards,

Mike

New Member

muchas gracias por la ayuda.

muchas gracias por la ayuda.

me ha funcionado perfecto!!

5575
Views
0
Helpful
5
Replies
CreatePlease login to create content