Hi,
I am having this log warning:
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 91% exceeds warning level 90%
R1#show platform software status control-processor brief
Load Average
Slot Status 1-Min 5-Min 15-Min
RP0 Healthy 0.26 0.28 0.28
ESP0 Healthy 0.03 0.08 0.08
SIP0 Healthy 0.06 0.04 0.00
Memory (kB)
Slot Status Total Used (Pct) Free (Pct) Committed (Pct)
RP0 Healthy 3874952 2842440 (73%) 1032512 (27%) 2974400 (77%)
ESP0 Warning 969536 956928 (99%) 12608 ( 1%) 877484 (91%)
SIP0 Healthy 449752 293644 (65%) 156108 (35%) 298084 (66%)
CPU Utilization
Slot CPU User System Nice Idle IRQ SIRQ IOwait
RP0 0 7.19 2.09 0.00 90.50 0.09 0.09 0.00
ESP0 0 0.80 1.00 0.00 98.20 0.00 0.00 0.00
SIP0 0 4.49 6.39 0.00 89.11 0.00 0.00 0.00
The router is receiving BGP full route from 2 neighbor.
Is it some kind of bug ? or 1Gbyte of RAM is not enough for 2 BGP full route ?
Let me know if you need further show command result.
Thanks,
