Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASR1006 - bootflash: not present

Hi Guys,

Have an ASR1006 (Dual RP's/Dual ESP's), and the "standby" RP is stuck in rommon:

System Bootstrap, Version 12.2(33r)XN2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2008 by cisco Systems, Inc.


Current image running: Boot ROM0
Last reset cause: LocalSoft

ASR1000-RP1 platform with 4194303 Kbytes of main memory

no valid BOOT image found
Final autoboot attempt from default boot device...
media drive bootflash: not present
boot: cannot determine first file name on device "bootflash:"
autoboot: boot failed, restarting...

System Bootstrap, Version 12.2(33r)XN2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2008 by cisco Systems, Inc.


Current image running: Boot ROM0

                  

Then checking dev, bootflash is there, but then cant be read:

rommon 1 > dev

Devices in device table:

        id  name

bootflash:  Internal flash drive

harddisk:  Internal hard disk

     usb0:  External USB drive 0

     usb1:  External USB drive 1

rommon 2 > dir bootflash:

media drive bootflash: not present

Any suggestions greatly appreciated.

Everyone's tags (3)
5 REPLIES
New Member

 In my case, after cold

 

In my case, after cold reboot, issue no more.

Cisco Employee

Hi, Im also having the same

Hi, Im also having the same issue, here is my out boot after resetting from rommon:

 

Current image running: Boot ROM1
Last reset cause: LocalSoft
Last reset at: Wed Jan 28 17:01:05 UTC 2015


ASR1000-RP1 platform with 4194303 Kbytes of main memory

media drive bootflash: not present
boot: error executing "boot bootflash:asr1000rp1-adventerprisek9.03.07.00.S.152-4.S.bin"
autoboot: boot failed, restarting...

 

System Bootstrap, Version 15.2(1r)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.


Current image running: Boot ROM1
Last reset cause: LocalSoft
Last reset at: Wed Jan 28 17:02:05 UTC 2015


ASR1000-RP1 platform with 4194303 Kbytes of main memory

no valid BOOT image found
Final autoboot attempt from default boot device...

 

If anyone has a solution to this please respond.

 

Thanks,

Hani

Hall of Fame Super Gold

Hani,  You can boot the ASR's

Hani, 

 

You can boot the ASR's IOS straight from a USB stick. 

Cisco Employee

Thanks Leo, Can the ASR rp1

Thanks Leo, Can the ASR rp1 from the HDD, I'm not sure if that a valid option.

 

Thanks again,

Hani

Hall of Fame Super Gold

Not HDD, a USB thumb drive.

Not HDD, a USB thumb drive.

1219
Views
0
Helpful
5
Replies