Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ASR1006 cannot upgrade rommon

ASR1006# upgrade rom-monitor filename bootflash:asr1000-rommon.153-3r.S1.pkg all

Upgrade rom-monitor on Route-Processor 0

Target copying rom-monitor image file

rsync: link_stat "rommon/mcp/RP/RP2/latest.bin" (in rommon_upgrade_pub) failed: No such file or directory (2)

rsync error: some files could not be transferred (code 23) at /auto/mcpbuilds13/release/03.07.03.S/BLD-03.07.03.S/contrib/rsync/main.c(1392) [receiver=2.6.9]

ASR1006#show platform

Chassis type: ASR1006

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    00:11:22

0/2      SPA-5X1GE-V2        ok                    00:10:14

2         ASR1000-SIP10       ok                    00:11:22

R0        ASR1000-RP2         ok, active            00:11:22

P0        ASR1006-PWR-AC      ok                    00:11:05

P1        ASR1006-PWR-AC      ok                    00:11:04

Slot      CPLD Version        Firmware Version

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC

2         09111601            12.2(33r)XNC

R0        10021901            15.3(1r)S

ASR1006 with RP2, running asr1000rp2-adventerprisek9.03.07.03.S.152-4.S3.bin

Everyone's tags (1)
6 REPLIES
Hall of Fame Super Gold

ASR1006 cannot upgrade rommon

No such file or directory

Means the bootstrap file is not found in the place you've specified, i.  e.  the bootflash.

Can you please post the output to the command "dir"?

New Member

Re: ASR1006 cannot upgrade rommon

ASR1006#dir

Directory of bootflash:/

   11  drwx       16384  Nov 25 2010 03:15:16 +00:00  lost+found

193537  drwx        4096   Nov 5 2012 02:14:00 +00:00  vman_fdb

129025  drwx        4096  Nov 25 2010 03:18:18 +00:00  .installer

48385  drwx        4096  Aug 27 2013 23:39:52 +00:00  .prst_sync

64513  drwx        4096  Nov 25 2010 03:47:43 +00:00  .rollback_timer

   14  -rw-     2361648  Mar 14 2013 15:28:21 +00:00  asr1000-rommon.153-1r.S.pkg

48386  -rw-   598912444  Aug 27 2013 01:48:16 +00:00  asr1000rp2-adventerprisek9.03.09.00.S.153-2.S.bin

   12  -rw-   569597380   Oct 9 2013 13:23:38 +00:00  asr1000rp2-adventerprisek9.03.10.00.S.153-3.S-ext.bin

   13  -rw-    15261696   Oct 9 2013 13:25:35 +00:00  asa824-11-k8.bin

209667  -rw-        7745  Aug 23 2013 23:22:13 +00:00  packages.conf

   15  -rw-      555312  Oct 25 2013 22:14:35 +00:00  asr1000-rommon.153-3r.S1.pkg

   16  -rw-   484677032  Oct 25 2013 22:36:09 +00:00  asr1000rp2-adventerprisek9.03.07.03.S.152-4.S3.bin

The error pops up when I try to upgrade rommon

Hall of Fame Super Gold

Re: ASR1006 cannot upgrade rommon

I know what is going on ...

Your file is "corrupt" or download was not completed.  Look at the file size.  It doesn't add up.

Do this command "verify /md5 bootflash:asr1000-rommon.153-3r.S1.pkg 7d7b3342b4922b7216ceea8bf112caf4" and I can assure you this will kick up an error message.

"7d7b3342b4922b7216ceea8bf112caf4" is the MD5 hash value taken from the Cisco website.  Besides, look at the file size listed in the Cisco website.  The file is suppose to be "2.42 MB".

New Member

Re: ASR1006 cannot upgrade rommon

ASR1006#verify /md5 bootflash:

bootflash:asr1000-rommon.153-3r.S1.pkg c818ccd5af831f844646a74ffe33d1d8

........................................................................................................................................Done!

Verified (bootflash:asr1000-rommon.153-3r.S1.pkg) = c818ccd5af831f844646a74ffe33d1d8

MD5 is actually correct.

ASR1000 Series ROM Monitor upgrade package for Gigabit Ethernet Linecard 

asr1000-rommon.153-3r.S1.pkg

ASR1000 Series ROM Monitor upgrade package for m8500 and x86

asr1000-rommon.152-4r.S1.fc1.pkg

Confused. What is the rommon upgrade for?

Hall of Fame Super Gold

Re: ASR1006 cannot upgrade rommon

Resolved Caveats in ROMmon Release 15.3(3r)S1

The following issue has been resolved in Release 15.3(3r)S1:

CSCui25176

Modified the CPLD's HKP PLL configuration register value in the Cisco ASR 1000 Ethernet Line Card to reflect IBM's recommended value for the correct HKP PLL configuration.

Check out the bug.  If you have the line card affected, then upgrade to 15.3(3r)S1.  Otherwise, don't worry about it.

The second software is an older ROMmon.

New Member

Try transfer the file in ftp

Try transfer the file in ftp binary mode rather than ascii mode

1915
Views
0
Helpful
6
Replies
CreatePlease to create content