cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
4
Replies

astonishing problem of ping between CRS and GSR

thoughtjj
Level 1
Level 1

GSR--192.168.1.2--pos--192.168.1.1--CRS

on CRS

ping 192.168.1.2 all ok,whether how large ip packet,display!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

but on GSR

ping 192.168.1.1,can not success one packet,i do not set any parameter for ping,display.....

please help me,how to Troubleshooting this problem?thanks

4 Replies 4

Pavel Bykov
Level 5
Level 5

It doesn't really matter that it's GSR/CRS in this case - GSR/GSR works without a problem just like 7200/7200. Are you running XR?

debug icmp

debug ipv4 packet ACL

where acl has permit 192.168.1.0/24

thanks for your reply

gsr is ios software

crs is xr software

Kerem Gursu
Level 1
Level 1

Hi Cheng,

Cisco CRS series routers (like GSR routers running IOX ) act slightly different than other routers. Cisco IOX has a built in mechanism called Local Packet Transport Services (LPTS). LPTS is made of various different components , but in your case , you seem to be concerned with LPTS policers that rate limit the icmp traffic handled by the router.

thanks for your suggestion

crs is core,there are many gsr connect with it,other gsr ping it are all ok

only this gsr have this problem like it

so i am surprised with it

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: