01-14-2010 08:33 AM - edited 03-04-2019 07:12 AM
Hi,
Sorry to ask this basic quiestion.Kindly help me in understaning the below output.
ATM1/0.70 is deleted, line protocol is down ============ATM is Deleted ????
Hardware is ENHANCED ATM PA
MTU 4470 bytes, BW 149760 Kbit, DLY 80 usec,
reliability 255/255, txload 5/255, rxload 1/255
Lijesh.N.C
Solved! Go to Solution.
01-15-2010 02:11 AM
Hello Lijesh,
it means that logical subinterface ATM1/0.70 has been removed with
conf t
no int atm1/0.70.
Actually, until next reload the IDB object for this subinterface will still exist.
if you issue
int atm1/0.70
the object is reinserted in the list of active interfaces with its previous configuration
Hope to help
Giuseppe
01-15-2010 02:11 AM
Hello Lijesh,
it means that logical subinterface ATM1/0.70 has been removed with
conf t
no int atm1/0.70.
Actually, until next reload the IDB object for this subinterface will still exist.
if you issue
int atm1/0.70
the object is reinserted in the list of active interfaces with its previous configuration
Hope to help
Giuseppe
01-15-2010 05:19 AM
Hi Giuseppe,
Thank u so much understood and clear now.
Cherrs.
Lijesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide