Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ATM interface not accessible

I have a gateway interface configured with ATM. I can see the interface is up on both side..pvc is configured as well but I cant reach it. cant ping it at all. What could be the reason for this?

4 REPLIES

Re: ATM interface not accessible

Uzma,

I don't know exactly what your problem is. Please post the configuration.

Toshi

Re: ATM interface not accessible

Uzma,

I'm not sure that why I got 1P!. Well,I don't want to presume things. Actually I had in mind about the default route missing from your configuration.

Toshi

Hall of Fame Super Silver

Re: ATM interface not accessible

Hello Toshi,

my guess is that if the ATM interface is not point-to-point, and/or ATM inverse ARP is disabled, a manual mapping is needed:

I usually use mapping also for point-to-point ATM subinterface

Something like this:

int atm4/0

no ip address

int atm4/0.100 point-to-point

ip address 10.82.16.1 255.255.255.252

pvc 10/100

protocol ip 10.82.16.2 broadcast

Hope to help

Giuseppe

Re: ATM interface not accessible

Giuseppe,

That's nice. 5P!

I just want more information to help. That's why I asked for configuration.

Thanks

Toshi

110
Views
6
Helpful
4
Replies
CreatePlease to create content