ATM issue

[enriquebs]

HI all,

Have anyone idea about the meaning of the following output?

Jun 5 13:09:59: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:01: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:03: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:05: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:07: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:19: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:21: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:23: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:25: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:27: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:43: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:45: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:47: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

Jun 5 13:10:49: ATM(ATM4/0): Encapsulation error1, link=7, host=A099415

We get it after type a debug atm errors / events. It is the result of a ping.

Thanks in advance,

[vladrac-ccna]

This means that you dont have valid ATM static or dynamic map to the remote address

Check this link, might help you:

http://www.cisco.com/en/US/customer/products/hw/routers/ps314/products_configuration_example09186a0080093bf9.shtml

HTH,

if it does, please rate this post.

vlad