I've got a site with 2 E1's connected in an ATM IMA configuration.The router card is an NM-ATM-4E1. I'm getting constant member state changes in the logs even though the connection is not dropping. The CIR from the telco is 2048Mbps.Does this mean both links will have traffic or not.Why would these error messages keep appearing in the logs.
Thanks in advance for the feedback.
005467: Jul 10 16:03:21.574 CET: %IMA-5-ACTIVE_LINK_CHANGE: IMA Group ATM3/IMA3 now has 1 active links, active link bitmap is 0x1.
005468: Jul 10 16:03:21.778 CET: %IMA-5-ACTIVE_LINK_CHANGE: IMA Group ATM3/IMA3 now has 2 active links, active link bitmap is 0x3.
005469: Jul 10 16:09:12.277 CET: %IMA-5-ACTIVE_LINK_CHANGE: IMA Group ATM3/IMA3 now has 1 active links, active link bitmap is 0x1.
005470: Jul 10 16:09:12.533 CET: %IMA-5-ACTIVE_LINK_CHANGE: IMA Group ATM3/IMA3
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.