Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATM point to point XR

How to configure the following commands on an XR device ?

Router#sh running-config interface ATM5/3.1

Building configuration...

Current configuration : 200 bytes

!

interface ATM5/3.1 point-to-point

ip address 1.1.1.1 255.255.255.128

no ip directed-broadcast

no atm enable-ilmi-trap

pvc 52/53

protocol ip 1.1.1.2 broadcast

encapsulation aal5snap

!

end

I didnt see protocol ip broadcast command on XR,,,,Please help...

1 REPLY
Hall of Fame Super Gold

Re: ATM point to point XR

You do not need "protocol ip broadcast" on p-t-p links, perhaps that's why XR doesn't have it.

111
Views
0
Helpful
1
Replies