HI we are getting a T1 from ATT, they only choice they list on their application is a T1 SINA - i think this is a V.35 Seial cable (which is what we used in CCNA school) but i dont want to buy the wrong WIC card - does anyone know which one i can get for a 2620XM ? It doesnt actually need to be for a 2620XM i just like that one and have the option to get which one will work best. -- thank you -- Ed
I would check back with AT&T and ask them what type of connection they provide. Chances are that you need an RJ-45 connection, in which case you would have to buy a WIC-1DSU-T1-V2. If they say X.21 or V.35, you could get a WIC-1T.
Check these links for the specs of both cards:
Cisco T1 DSU/CSU WAN Interface Card (WIC-1DSU-T1-V2)
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...