Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AutoLearn and Annex-D

I was told by AT&T that I needed to make sure my router was set to AutoLearn and Annex-D. What exactly is this and how do I configure it? I'm using a 2811 with a T1 CSU/DSU WIC.

Thanks.

3 REPLIES
Hall of Fame Super Gold

Re: AutoLearn and Annex-D

Hi, these are the LMI standards for your Frame Relay T1. Just configure lmi-type ansi and the pvc (dlci) number given by the SP.

Hope this helps, please rate all useful posts!

New Member

Re: AutoLearn and Annex-D

That's fine, however, I've been running lmi-type cisco for 3 years since this circuit was installed. Why would I have to change it now? Thanks.

Hall of Fame Super Gold

Re: AutoLearn and Annex-D

Not necessarily, in fact the switch may even be auto-sensing LMI. You may ask telco why they are telling you that and if it means they are changing something.

Hope this helps, if so please rate post

107
Views
0
Helpful
3
Replies
CreatePlease to create content