Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AUX - Cisco 1841

Howdy,

I've a Cisco 1841 with both WAN ports in use FE 0/0 FE 0/1

First FE 0/0 has a MPLS connection with my internet provider. 2MB/2MB DL/UL

Second FE 0/1 Has an internal MPLS with one of our server storage provider. 1MB/1MB DL/UL

The thing is, I have a second internet connection wired in a low cost router for emergencies. I want to centralize all the services in the 1841.

It is possible to configure AUX port for a third ADSL connection and load balancing between ADSL1 (FE 0/0) and ADSL2 (future AUX port) 2MB/2MB DL/UL

( ? )

Or need another router?

Thanks in advance,

Regards,

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions

Re: AUX - Cisco 1841

Hi Miguel,

You'll need the WIC-1ADSL for the said additional WAN connection.

The AUX port is usually connected to an external modem for remote management.


Sent from Cisco Technical Support iPhone App

2 REPLIES

Re: AUX - Cisco 1841

Hi Miguel,

You'll need the WIC-1ADSL for the said additional WAN connection.

The AUX port is usually connected to an external modem for remote management.


Sent from Cisco Technical Support iPhone App

New Member

Re: AUX - Cisco 1841

Thank you johnlloyd_13 for your quick response.

Regards,

114
Views
0
Helpful
2
Replies
This widget could not be displayed.