Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

aux port config

i want to access my remote router console using aux port by modem can someone help me to provide what configuration has to be done in both end

any help highly appreciated

3 REPLIES
Purple

Re: aux port config

New Member

Re: aux port config

Paresh

i hve some issues

here it is my aux port config on 2800 router

line aux 0

exec-timeout 0 0

privilege level 15

password XXXXX

login local

modem InOut

modem autoconfigure discovery

no exec

transport input all

autoselect during-login

stopbits 1

speed 57600

flowcontrol hardware

while i am trying to access through my remote end using hyper terminal i am able to connect but my hyper terminal still showing blank

can yoy help me to sort out this problem

regards

Re: aux port config

Hi

Assuming you have a POTS line connecting to modem which gets connected to Aux port

Open a normal hyperterminal session

Type AT and enter

then ATD

It will dial the digits through the modem and give you the prompt

HTH

Narayan

192
Views
3
Helpful
3
Replies
CreatePlease login to create content