I am again studying class-based policing. I am trying to limit the input packets to an interface at 600kbps. I'm trying to hit the loopback interface so it will pass the fast-e interface. I applied the policy on the physical link. Here's my configuration. Using a WAN killer, I'm trying to hit 192.168.0.110. I am generating 700kbps from the WAN killer. Please check the output of show policy-map interface. Does it mean that the interface is receiving 713000bps and dropping 114,000bps of it? Also, will my configuration really work for a 600kbps policing? Will it also work the same for an output policy? Thanks in advance.
police 600000 75000 75000 conform-action transmit exceed-action drop
ip address 10.196.0.110 255.255.255.0
ip address 192.168.0.110 255.255.255.255
Router#sh policy-map interface
Service-policy input: police-traffic
Class-map: class-default (match-any)
634319 packets, 190126540 bytes
30 second offered rate 713000 bps, drop rate 114000 bps
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...