Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

backing up configuration with ios archive

I am trying to back up the running configuration with the ios archive feature on a 1941 running 15.1(4)m4.  This is being done via scp/sftp over a site ipsec vpn to an archive server running windows server 2012 with solarwinds sftp/scp software.  The following configuration is on the 1941.  

 log config
 path scp://username:password@ip address/$h
 time-period 4320

The transfer is not completing.  What i am getting with a sh archive is

Archive #  Name
   1        :Error - No space left on device <- Most Recent
   2        :Error - No space left on device

Don't know why getting this error since space is no issue on the server, or even on flash if it's referring to that.  Also getting below with debug ip scp:

: SCP: SSH Client connect failed

This could be trying to transfer through the outside interface and not the private interface for tunnel.  Tried to use the 'ssh client-interface <interface>' command to set the outgoing interface but the command would not take.  Anyone seen something similar to this

CreatePlease to create content