I have a Cisco 837 router and I want to backup the config our TFTP server, what command do I need to use please? What I want to achieve is backup the configure, then change the configuration of the router so it doesn't work properly, then restore the backup.
Re: backing up router config to TFTP server - How?
If the router is on the same IP range as the TFTP server I can do this, but if it's on a different IP range I can't, however I can ping the TFTP server from the router and there is no firewall inbetween.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...