backup link configuration among two vpn link and two internet link
Plz guide me .if i have two vpn link . one is primay and second is backup. having lan ip 10.190.z.z/24 and 10.191.x.x/24 respactivity. also two internet link. how should i physicall attached both vpn . and intenet link. plz also draw topology . internel lan pool is 10.1.x.x/24. no vlan used ,.only vlan 1 present. device available is cisco 2900. swich is l3 3750 . plz . i know i should use SLA. POLICLY BASE . but guide me only .how to connet .
user need internet as well as vpn link at a time to loggng server. present on remote city. guide me how to physicaly attaech all the device and where .ip of both vpn link is from different network. plz suggest.redesign network will also acceptable.
i'm uploading . here two more internet link has to terminte . how should i do.. ? my requirement is to i should use both the link vpn 1sp and 2 nd vpn . for load balananing and if one get down. no service get affaceted . also user can run internet too. for checking there mail service. how should i design .
what devcie and where to place. and on what devie is should do the configuration .any solution . idea. plz. load balancing and high availablity is my main goal.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...