Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bad memory - wrote zero Error

I have a Cisco 2524 Router while booting following Message is being displayed

"Bad memory - wrote zero, read 0xFFFFFFFF at location 0x00000010" .

What is the cause of this Problem ?

Akhtar

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: Bad memory - wrote zero Error

Hi Akhtar,

You get that error message when you have a DRAM SIMM that is not seated properly in its slot. I suggest you open up the chassis and re-seat the SIMM.

The following link has more info on this:

http://www.ciscotaccc.com/core/showcase?case=K19410284

Hope that helps - pls rate the post if it does.

Paresh

2 REPLIES
Purple

Re: Bad memory - wrote zero Error

Hi Akhtar,

You get that error message when you have a DRAM SIMM that is not seated properly in its slot. I suggest you open up the chassis and re-seat the SIMM.

The following link has more info on this:

http://www.ciscotaccc.com/core/showcase?case=K19410284

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: Bad memory - wrote zero Error

Hi Paresh,

re-seating didn't worked & possibly the SIMM was faulty, but the link was helpful.

Akhtar

211
Views
0
Helpful
2
Replies
CreatePlease login to create content