Hola , tengo 2 conecciones wan de 2 isp distintos en una recibo 8 mb y otra de 20 mb, como es la mejor de balancear los anchos de banda, para que cuando la coneccion de 8mb este completa siga sacando el trafico por la de 20mb.
I am a small local ISP, now take 2 internet connections, a connection is 8Mb and another is 16 Mb, at this time performs load balancing mikrotik using a PCC team, my biggest problem is how to make efficient use balancing cisco 3 teams, one in each my 2 connections with suppliers and the other by rolling. This January 1841 I have this in the wan of 8 MB, January 2811 which is on the wan of 25 mb and 2911 to conduct the balance of traffic. Currently the problem is that the 2911 takes stock taking 2 connections by 2811 and one in 1841. This works pretty well, but the problem is when some large customers agree and megaupload downloads, making saturating the wan of 8 mb, and leaving the wan of 16 mb with very little use.
My other problem is that I spend the wan from 16MB to 25 MB, so balanced balancing 2 to 1, I no longer would be useful, I have seen several methods used eigrp and other option, the query is contretra which is the best method to use for this.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...