Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

bandwidth allocation

Hi,

How different is bandwidth allocation or shaping on cisco routers and other devcies ( like specific packetshapers, packeteer etc).

Does it mean shaping will apply even if there is no congestion or only if congestion is seen.

Appreciate your help!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: bandwidth allocation

Hi there!

Shaping will apply despite line being congested or not. Traffic shaping is used to guarantee a minimum amount of bandwidth for certain class and traffic policing to limit a class traffic to a maximum amount of bandwidth.

Usually from on-hand experience, provider will police the bandwidth and  customers will shape (to avoid packet drop on the provider side).

Regarding your question about Cisco vs others, I have more experience with Cisco, but I believe that in terms of definition of what shaping, policing and so on it should be the same. The configuration and specific features may be different from product to product.

2 REPLIES

Re: bandwidth allocation

Hi there!

Shaping will apply despite line being congested or not. Traffic shaping is used to guarantee a minimum amount of bandwidth for certain class and traffic policing to limit a class traffic to a maximum amount of bandwidth.

Usually from on-hand experience, provider will police the bandwidth and  customers will shape (to avoid packet drop on the provider side).

Regarding your question about Cisco vs others, I have more experience with Cisco, but I believe that in terms of definition of what shaping, policing and so on it should be the same. The configuration and specific features may be different from product to product.

Bronze

Re: bandwidth allocation

Hi,

Agree with Calin that shaping is concept which is independent of vendor. Only configuration & specific features may change.

But products like packeteer give many more features like compression and also they have much better monitoring & reporting features and specifically meant to do traffic management rather than cisco routers where shaping is one of the feature.

Like I have worked on peribit (now Juniper WX series) , they have MSR (Molecular sequence reduction) technology for compression on WAN link.

A typical scenario to use bandwidth optimising solutions is where you have large setup , many branch offices end up choking your datacenter. You deploy these compression boxes on you WAN.

If only shaping is required & setup is not very large, your router will do the trick for you.

Hope this helps

Kid Regards,

316
Views
10
Helpful
2
Replies