Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

bandwidth limitation in EIGRP

Hi

i have three branches its connected through Leased Line and eigrp as routing protocol.i have 2 mbps bandwidth in Ho.i wish to limit the bandwith 1 mbps to my branch offices.its possible.please help me to solve this

Mohan

INDSYS

1 REPLY
Hall of Fame Super Silver

Re: bandwidth limitation in EIGRP

Hello Mohan,

if you want to limit to 1 Mbps all traffic that goes from each branch router to the central site you need to use traffic shaping.

you can take advantage of Class Based Traffic Shaping:

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/reg_pkt_flow_per_cls_ps6350_TSD_Products_Configuration_Guide_Chapter.html

policy-map shape-1mbps

class default

shape average 1000000

! to call a child policy

service-policy policy_child

you can also implement a two level QoS by calling a CBWFQ child policy so that you emulate a pipe of 1 Mbps and you also provide differianted QoS to different traffic classes

see

if you like you can adjust the bandwidth parameter to 1 Mbps and EIGRP will use by default up to 50% of the stated BW for its updates

Hope to help

Giuseppe

124
Views
0
Helpful
1
Replies