Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bandwidth

Hi,

From PE router to CE router connected with serial E1 link. Now the customer is using 2 mbps bandwidth. I want to reduce the bandwidth. Can I use Bandwidth command in the PE interface?

3 REPLIES
Hall of Fame Super Blue

Re: Bandwidth

The bandwidth command will not affect how much bandwidth there actually is. Changing the bandwidth under the interface will effect routing protocols ie. EIGRP/OSPF path calculation and QOS configuration.

If you want to actually restrict the amount of available bandwidth you need to look at either policing or shaping the traffic on the serial interface.

Jon

New Member

Re: Bandwidth

Thanks jon

New Member

Re: Bandwidth

example:

access-list 1 permit any any

class-map POLICE

match access-group 1

policy-map REDUCE_BANDWIDTH

class POLICE

police 500000 conform-action transmit exceed-action drop

int s0/1

service-policy in REDUCE_BANDWIDTH

112
Views
0
Helpful
3
Replies