Baselining in a router

[csc010854800]

how to do baselining in the router so that router can be restored to some earlier point.

[Danilo Dy]

Check Cisco IOS Software Configuration Management beginning Cisco IOS 12.3(7)T

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml#ios

[johnlloyd_13]

you may opt to back up your start up config and place it in an ftp server. this way you can retrieve and restore it again on your router.

or if you want to configure baseline commands on the router, use this link:

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html