Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Basic Logging

I have a couple of routers that are logging to a syslog server. However, I've set the logging to debug, and I'm not seeing anything in the log files.

I do see log file entries for acl's that I've enabled log-input.

Any hints? I'm baffled.

Thanks!

Jeff

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Basic Logging

try using CLI:(looging a source-interface) I.E.

logging source-interface loopback 0

and your are configuring the logging server:

logging xxx.xxx.xxx.xxx

2 REPLIES
New Member

Re: Basic Logging

Here's the logging config:

ExtRtr1#sh run | i logging

logging buffered 16384 notifications

no logging console

logging enable

logging size 500

logging trap debugging

logging source-interface Loopback0

logging a.b.c.d

New Member

Re: Basic Logging

try using CLI:(looging a source-interface) I.E.

logging source-interface loopback 0

and your are configuring the logging server:

logging xxx.xxx.xxx.xxx

117
Views
0
Helpful
2
Replies
CreatePlease to create content