Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...

translator.png Asolution.png htlm-source.png insertcode(1).png
Kelli Glass by Community Manager
  • 10028 Views
  • 7 replies
  • 16 Helpful votes

Resolved! DMVPN over MPLS

We are migrating from Frame Relay to MPLS WAN services, to interconect about 25 remotes sites.Is it posible to deploy DMVPN to connect the remotes sites using a tunnel?I have heard about using GET VPN instead of DMVPN over MPLS, whats the difference ...

Hi there, I currently have two locations connected using a MetroE link of 50Mpbs (CIR) burstable up to a 100Mbps. Location A has all our servers and storage and in location B, all the important departments such as finance, etc. I use Solarwinds to m...

All,I'm in the process of configuring failover for dual routers to dual ISPs (both routers connected to their own ISP using BGP).  I was wondering if it would be more efficient to configure a backup default route using tracking on our ASA that will a...

Hi, guys I have a question here. I saw BGP always needs another protocol like OSPF or EIGRP etc. to propegate routes. Why this is so? Also the same route propegation can be done with BGP Network command?                 

sugatada9 by Level 1
  • 5800 Views
  • 1 replies
  • 0 Helpful votes

Dear AllI am testing my mpls configuration on a emulator and i have 2 HQ sites advertising the same loopback.My idea is to tag the export route with a community and to import this particular community in remote site 1 instead of rmote site 2.However,...

Hineed assistance on how to control the routes for sending and receiving on a mpls router at HQMPLS cloud is running  BGPon LAN we run OSPFHQ routes need to be seen by remote office behind mpls 172.16.20.1/2310.10.1.0/24192.168.1.0/24Remote office ro...

Hi Everyone,I have a  problem when I want to reach this ip. My topology is below.This is point to point network.LAN-Cisco 1841-Lease line===ISP -199.99.99.1Fa 0/0 :10.3.3.1 and has a  secondary ip that is 188.88.88.2 (public ip)I want to use my secon...

KY_ by Level 4
  • 206 Views
  • 1 replies
  • 0 Helpful votes

Is there an OC3 interface available for the 3945 ISR2 for a full OC3/155Mb IP WAN port? I am familiar with the PA-POS-1OC3 Packet/SONET Module that I have used on 7000 series but this appears incompatible with the 3900's.  The only 3900 OC3 module I ...

scottkuhn by Level 1
  • 530 Views
  • 1 replies
  • 0 Helpful votes

This is all done in GNS3 and it got me stumped so any helps is appreciated.I am trying to advertize only certain routes (24.1.0.0/20) from R1 to ISP via ip community-list but for some reason ISP is not seeing 24.1.0.0/20 the route.Explanation:R1(AS20...

Need Some Help,I configured DSCP marking on my 3750E, however i am not seeing any hits on the correct class. Here is my config.Class Map match-any TEST    Match access-group name TEST    Match ip  dscp ef (46)  Policy Map TEST    Class TEST      set ...

Hi,I was wondering if anyone can direct me to a design sample on how to connect two regional dmvpn hubs to one another.  I've seen examples with a hierarchical design but the example requires 3 hubs.. 1 central hub and another 2 one at each regional ...

dmark by Level 1
  • 524 Views
  • 2 replies
  • 0 Helpful votes

I have been setting up a 819HGW and seem to have locked myself out of the CCP interface. I can still access the unit via CCP Express and CLI but need to be able to access via the full CCP. I was finishing up the unit and configuring WAAS express and ...

Hello. Any help appreciated with this problem ...We had a user complaining about a temporary dropped network connection. Looking at the log on the switch the host PC connects to I can see the dropped connection, and it was for a short time (about 20 ...

Hi guys,i want to ask something about log that i got recently on one of my router which i monitor,the log is65986: 164409: Sep 18 09:58:43.295 UTC:%HWIC_HOST-1-RX_OVERRUN_ERROR: HWIC_HOST: Host termination logic experience FIFO overrun for Interface ...