Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...
Thank you for your help.Let me ask you about perpetual licenses for IOS XE 17.3.2 and later. I am using C1111X-8P and I am thinking of reporting in the CSSM offline method. The first report is due to expire in 365 days. Will the SEC and APP features,...
hi,i'll be changing an ISP/BGP peer. my question is, do i negate first the old bgp router-id or just directly configure/apply the new router-id?do i need to do a "clear ip bgp" to establish the new ISP/BGP peer?router bgp 65123 neighbor 63.21.16.4 sh...
What are the advantages of using ADVPN vs a full-mesh? Please need support. Thanks
From the business aspect, why would we recommend a client to use sdwan vs mpls or dedicated lines
Hi, I'm trying to configure a connection between 2 house network as in the image and I need help on how to configure the switch to make all device able to connect to device on the other network. I've check both router and see static routing menu on w...
What is the multicast address used by BGP to operate
I have some branch locations with a simple set up. A router with an access switch connected to it, then another access switch connected to that one to provide POE to IP phones. Currently all devices are in the same VLAN.I also have an access point co...
Could you please help me? I've tried to make a connection from a dhcp server to a linksys router, I've configured the router that separates the two networks, but I don't understand why it doesn't work, the goal is to connect to a web server, but it's...
In the video 'All you need to know about ISR Fixed Branch Platforms' there is a mention of 'dynamic core allocation' on the ISR1100 platform.Starting from IOS-XE 17.6 this would appearantly allow the Service Core to be set up as a Dataplane Core, all...
Hi,I am unable to add an AutoNAT rule to a 2nd Public IP part of our ISP block of 6 hosts.I have multiple servers in DMZ where I want to translate each to a different Public IPCan only Nat to the Destination Interface IP, and not to a new Address Pub...
Hello everyone!We have ASR1001x with fullview and ipsec tunnels. We use local policy to forward packets from PA addresses to their respective gateways. When the traffic load is high PBR stop working and the router starts using cef, when there is litt...
Hi Community, Iam creating Smart license in IOSXR with http So I used "destination transport-method http" and also put the destination url. When I do show run, i see "destination transport-method email disable" also in the configuration ----- call-ho...
Hi can anyone tell how to check Cisco 8300 series edge platform router hardware throughput verification command or any table for base license as well as booster.
why port is not assigned into vlan what is use of vlan without port ,in which perspective vlan without port is used ?
Hello everyone, I'm configuring new Esa cluster because, the ip address of it are changed so that, I would like to know if the cluster needs to communicate to ldap or others networks services . Another question is regards to the gateway, In which way...
