Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...
As per the subject, i'm wondering if it's possible to enable enhanced rtp header compression within the confines of the class-based MQC systemThe standard interface level command isip header-compression recoverable-loss dynamicI've had a look around ...
hi all,Was trying to test this concept described in http://www.ccnalab.net/load_sharing_bgp.phpbut after prepending my own AS, BGP still select only one default-route, did i missed something ?======================================ISP1:router bgp 7374...
Hello All:Quick question. Have a 3620 and need to add another 2 FE ports. I have an open slot and have a NM2e/2w. Popped it in and it doesn't see it. Lights on but sh hard and nothing.Running IOS 11.something. Can this indicate I need to upgrade IOS?...
Hi,I config three levels for remote access. all show command is on level 2 (privilege 5). However, it only how 6 line of running-config. any missing of the commands?----privilege exec level 1 tracerouteprivilege exec level 1 show running-config------...
I am looking for best practise configuration for 2800 Series Router which has security features bundled & IPS features. CBACSome1 please advice?
Hi, My Show module showing different status for two of my SPAs... Can anybody suggest what is that mean????Attached the show module and show version fyr.Rgs
is a T1 a *total* of 1.5Mbps (inbound + outbound) or can it provide 1.5 in while at the same time providing 1.5 out?
Hi all,I am looking for a solution as follows;2 Servers connected to an X.25 Switching Device that is connected to E1 lines. My problem is what Switching Equipment to Use, and then step by step process to configure the equipment. Further u can look a...
We have frame-relay for Internet access,at full T1 speedIs this T1 upload and download speed or is the bandwidth 50% of the T1 up and 50% down?
Hi Dear Frinds.Most probabaly Our Apnic membership will be over next week. So our BGP AS number will bi disabled. for time duration we renew or membership.So i want to ask we are using preifix list for our gatway router to secure it on internet.Now w...
Hi,I am having problems getting and isdn link up on a cisco 800 series router. I have tested the link on another router and it works fine so the link is good. anyone got any ideas?
I am trying to work out how to config load balancing/sharing using BGP to a single homed ISP.I have to CE routers (on the same AS) connecting to two separate PE routers (on the same AS) with 20M CDR PVC?s over a STM-1 links.BGP Configs on the CE?s ar...
Howdy all,We just added a second Internet T1 in a multilink bundle. The Internet seems pretty fast now but a continuous ping to two remote sites connected via VPN's are now dropping packets at the exact same time.Our router with the MLPPP configurati...
we have two remote offices and both are interconnected via metroethernet and in turn both the offices has WAN link (2 mbps ) towards the two different corporate office. and Corporate office is also connected via DS3. you can imagine this topolgy as a...
Should the router reported data in bits per second between two Cisco routers connected via T1 be about the same ? In other words, should the data one router sends be about equal to the data the other router receives and vice versa ? Logic tells me ye...
