05-18-2010 01:06 AM - edited 03-04-2019 08:31 AM
Hello community .
I have a set of ip phones sitting on the 192.168.11.0/24 Lan .
If I want to prioritise the SIP traffic getting in and out of thoses phones , can I use
ip access-list extended REALTIME
permit ip 192.168.11.0 0.0.0.255 any
permit ip any 192.168.11.0 0.0.0.255
deny ip any any
or is it better to use:
ip access-list extended REALTIME
permit ip any any eq 5060
Is matching only on the addressing part enough to get a match ?
Thanks
Solved! Go to Solution.
05-18-2010 01:12 AM
QoS Configuration Examples
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml
NOTE: Not all switches support full QoS.
Don't forget to rate useful posts. Thanks.
05-18-2010 01:12 AM
QoS Configuration Examples
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml
NOTE: Not all switches support full QoS.
Don't forget to rate useful posts. Thanks.
05-18-2010 01:29 AM
Thanks !
rgds
T
05-18-2010 02:05 AM
Thanks for the ratings Thomas.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide