If you're wondering about 40 and 20 percent, this should preserve the 2:1 bandwidth ratio of those classes without the need to modify reserve bandwith. Class default will do the "etc." traffic. It's configured to not use FQ to preserve the bandwidth ratios (for CBWFQ prior to 12.4.20T). You'll also need to define class-maps for the defined classes to match the correct traffic.
You do realize that DSCP markings only make sense if they are to be used later on? However, believe with your 12.3T release (which if you have maintainence you might want to upgrade to 12.4), you can use the "set dscp" (might be "set ip dscp" under each policy-map class statement. Normally you would set VoIP to DSCP EF, routine traffic to DSCP BE and perhaps your critical business apps to DSCP AF21.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.