%BGP-3-NOTIFICATION: sent to neighbor X.X.X.X 4/0 (hold time expired) 0 bytes
We have recently upgraded a Cisco 7600 series (sup7203bxl) router to version 12.2SRC6 (earlier version 12.2.SRC2). Since the upgrade we get bgp holdtime message to external bgp peer. Is it a coinsident or a know problem. The Troubleshoot Guide of BGP refers to MTU problems, but we can succesfully ping with MTU 1500.
Re: %BGP-3-NOTIFICATION: sent to neighbor X.X.X.X 4/0 (hold time
No the timers where the default (180 hold, every 60 seconds).
We rolled back to the older ios version, because we got complaints from our peers for flapping and problem was resolved. Still do not know what caused it. We will try to upgrade again at a later stage. It seems that network packets where droped randomly (we noticed except from BGP some BFD packets as well not being received). Perhaps there is an issue between the IOS version and the Line Cards (we are using OSM-4 GE-WAN), although I couldn't find any known bug.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...