I have 6 sites that connect up to an MPLS network and two of those sites have a 500Meg TLS ethernet connection between them. I am trying to get all the routing between all the sites to be dynamic for redundancy and failover. All the sites that connect up to the MPLS network are using BGP and the sites that have the 500Meg TLS circuit is BGP to talk to the MPLS cloud and static routes to talk across the TLS circuit between the two sites. I would like to implement EIGRP across the TLS circuit and get dynamic routing going to all our sites that way if the TLS circuit fails each site act independantly of on another. I am including drawings of each scenario.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...