Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BGP command Cisco 877 Router

Hi

Is it possible to set the following command on a Cisco 877 Router

router bgp 65500

At the moment it is saying it doesnt recognize the command and when I do router ? I don't see it in my list.

Thanks!

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: BGP command Cisco 877 Router

5 REPLIES

Re: BGP command Cisco 877 Router

Post "show version" from the router

Francisco.

Hall of Fame Super Silver

Re: BGP command Cisco 877 Router

Hello Drikillbride,

generally speaking it is a question of the IOS image running on the box.

you can use feature navigator tool (free access)

http://www.cisco.com/go/fn

and you can search by feature using BGP as the keyword then select platform =877

for example in 12..4T

c870-advipservicesk9-mz.124-24.T3.bin

if you haven't the correct feature set to upgrade you will need to purchase a license

if you have already a 15.0 IOS image you may have the correct image but you may need to install the correct license

post a

sh ver | inc image

to see what is in your device

Hope to help

Giuseppe

New Member

Re: BGP command Cisco 877 Router

Hi All

This is what I get from the show version

ROM: System Bootstrap, Version 12.3(8r) YI4, RELEASE SOFTWARE

System image file is "flash:c870-advsecurityk9-mz.124-15.T7.bin"

Thanks!

Re: BGP command Cisco 877 Router

New Member

Re: BGP command Cisco 877 Router

Thanks for that, I will look into upgrading the license on it.

1916
Views
0
Helpful
5
Replies