I have one cisco 7609 connected to cisco 7206 over multilple links of different bandwidth. Load sharing works well initially. Whenever there is a flap or link goes down the share count value is changed abnormally. This causes few of the links to be higly utilized and leaving the rest under utilized. bgp dmzlink-bw is enabled globally and dmzlink-bw is enabled per neighbor.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...