I have two external routers, one with each provider. I have a class C from each ISP, my own AS number. Should I assign the routers a static IP address from the static range they gave me or should I assign them an IP in the range I have advertised out via BGP?? I have an ASA behind the routers doing NAT. Should this have an IP address of one of the BGP networks??
Re: BGP - External routers use static or dyamic IPs?
I am not sure whether the 2 Class C networks mentioned by you are your own or assigned from ISP as you said you have your own AS number.
If you are talking about external interface of your router connnecting to your ISP, then it should be assigned with ISP provided WAN subnet. You will configure your local LAN with provider assigned Class C Subnet which you will advertise out.
Your ASA external interface should have public IP (provider assigned class C) & you will have private IP subnet internally.
With best regards...
Pls kindly rate if helpful or answered your question.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...