I have 2 wan routers A & Bthat are getting routes from different locations (One from WAN, the other from IPSEC/GRE Tunnels) I have IBGP setup between them, and this is working. Router A is redistrubing BGP into EIGRP, I would like router B to do the same, but not sure if it will distribute the learned routes from Router A and cause routing issues. Essentialy I have 2 Routes to my sites, 1 from Router A over the IPFR and the other from Router B via GRE tunnels,and I need to make sure that if either goes down, that the routes from BGP will be redistubuted into EIGRP.
multiple mutual = bidirectional redistribution points are a problem and would require appropriate route filtering for example using route tags.
if under BGP you use network command taking advantage from the fact it works for routes installed in the IP routing table be any means you are in a safer scenario that would allow you to redistribute BGP into EIGRP.
You can on RB use weight or local preference but eBGP routes are already preferred over iBGP routes (including those coming on the iBGP session with RA).
You may want to attach a network diagram and current configuration in order to get better help.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.