cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
353
Views
0
Helpful
2
Replies

BGP issue

Just Kennie
Level 1
Level 1

I have two iBGP routers, A (172.16.26.3) running AS 800, and B (172.16.26.2) running AS 65001 with bgp conf id 800.
Each time I try to advertise these prefixes on A
int lo0
ip add 140.10.2.1 255.255.255.0
int lo1
ip add 140.10.3.1 255.255.255.0
int lo2
ip add 140.10.4.1 255.255.255.0
int lo3
ip add 140.10.5.1 255.255.255.0
I get the following error

RB(config-router)#
*Mar  1 08:20:43.005: BGP: 172.16.26.3 Bad attributes FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 0043 0200 0000 1C40 0101 0040 0200 4003 04AC 101A 0380 0404 0000 0000 4005 0400 0000 6418 8C0A 0518 8C0A 0418 8C0A 0318 8C0A 02
R2(config-router)#
And the peering goes up and down

2 Replies 2

Calin C.
Level 5
Level 5

Hello Kennie!

Can we see some configuration? Maybe there is something wrong with the BGP confederation config.

Is this solved?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card