Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Silver

BGP on Port-channel

Hello everyone,

on the topology, I have two router A and B, and I want to put between two BGP routers,

my problem is that routers do not bridge connected physically, but through a port-channel (Vlan 13),

Do you think I can do the routing between the router A and B(even if Port-channel), and ensure the communication between them for have redundancy ?

I do not know how to configure the router iBGP between both router A and router B ?

Config eBGP:

Router A:

routeur bgp 100

neighbor 12.12.12.2 remote-as 2

network 10.10.10.0 mask 255.255.255.0

Router B:

router bgp 100

neighbor 13.13.13.2 remote-as 2

network 11.11.11.0 mask 255.255.255.0

Router ISP:

router bgp 2

neighbor 12.12.12.1 remote-as 100

neighbor 13.13.13.1 remote-as 100

network 10.218.218.0 mask 255.255.255.0

Config iBGP:

Router A:

neighbor ??????? remote-as 2

neighbor ??????? next-hop-self

....

Router B:

neighbor ??????? remote-as 2

neighbor ??????? next-hop-self

....

---

Posted by WebUser Jamall Haddann from Cisco Support Community App

1 REPLY
Silver

BGP on Port-channel

the topology is : https://supportforums.cisco.com/message/4006968?tstart=0#4006968

---

Posted by WebUser Jamall Haddann from Cisco Support Community App

85
Views
0
Helpful
1
Replies