customers A,B,C and D are in AS 100,200,300,and 400
AS 2500 upstreems Y and Z are in AS 500 and 600 (both are STM1 links)
in this the AS 2500 is assigned 50 MB to customer A ,requirement is that AS 2500 want to assign 30 mb traffic is from upsreem AS 500 (Y) and 20mb from upsterrm AS 600 (Z) from the total 50MB allocated to customer A
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...