I have One office & it is connected by two different ISP1 and ISP 2 ( Different AS number ), I have two 2 mb link between them. Now i want to configure traffic in such way one link use only 60 % with ISP1 and other link to IPS2 is using 40% traffic, How i can configure this ?
You may be having definite reasons for doin this, otherwise make full use of the pipe you are paying for. There are some QoS techniques for doing this. Rate-limiting, shaping & policing are some features.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...