replace-as feature will not work in this case, as it works manipulating the local AS but does not modify or delete other ASN´s in the AS_PATH. You can delete private ASN´s in the AS_PATH, but not public ones. What you could do is to use BGP Conditional Route Injection to inject the same prefix that you are receiving, however as you are generating it dynamically it will be advertised with just the AS of R1.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...