Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

BGP rib-failure.

hi ,

can any one help me with the link which give full details about RIB-FAILURES in bgp.

4 REPLIES
New Member

Re: BGP rib-failure.

Dear all,

need more than this, need some cases.

Re: BGP rib-failure.

AS describe by the url provided by Samir When BGP tries to install the bestpath prefix into Routing

Information Base (RIB) (for example, the IP Routing table), RIB might reject the BGP route due to any of these reasons:

* Route with better administrative distance already present in IGP.

For example, if a static route already exists in IP Routing table.

* Memory failure.

* The number of routes in VPN routing/forwarding (VRF) exceeds the

route-limit configured under the VRF instance.

In such cases, the prefixes that are rejected for these reasons are

identified by r RIB Failure in the show ip bgp command output and are

not advertised to the peers. This feature was first made available in Cisco IOS Software Release 12.2(08.05)T.

Re: BGP rib-failure.

AS describe by the url provided by Samir When BGP tries to install the bestpath prefix into Routing

Information Base (RIB) (for example, the IP Routing table), RIB might reject the BGP route due to any of these reasons:

* Route with better administrative distance already present in IGP.

For example, if a static route already exists in IP Routing table.

* Memory failure.

* The number of routes in VPN routing/forwarding (VRF) exceeds the

route-limit configured under the VRF instance.

In such cases, the prefixes that are rejected for these reasons are

identified by r RIB Failure in the show ip bgp command output and are

not advertised to the peers. This feature was first made available in Cisco IOS Software Release 12.2(08.05)T.

160
Views
0
Helpful
4
Replies
CreatePlease to create content